ATTO Technology Diamond Storage Array S-Class Instructions d'exploitation télécharger pdf (Page 95)

Troubleshooting

• If you perform a hardware restart, the Ethernet

connection is dropped. You must re-establish

the Ethernet connection.

• If you enter a command that requires a

Save

Configuration

command in either the serial

interface window or the Ethernet connection

window, you will not be able to access the

inactive window until the

Save Configuration

command is complete in the active window.

• If you still fail to communicate with the array,

swap out the management card and try to

connect using default settings.

If LUNs do not display on the host

• Ensure any configuration changes are

appropriate

• Type FirmwareRestart

• Re-start the host computer

• Verify all drives associated with the missing

LUN(s) are inserted properly and powered up.

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 104 105

Pas de commentaire

ATTO Technology Diamond Storage Array S-Class Instructions d'exploitation Page 95