ATTO Technology FC-3321 Guide d'installation télécharger pdf (Page 6)

Fibre Channel Adapter Board Installation Notes

9. Select the slot where you want to remove an ATTO ExpressPCI-FC

3300 or 3320 adapter board (see Figure 2).

Figure 2 LANserver EX Systems with Fibre Channel Adapter

Boards

10. Remove the screw holding the slot cover in place.

11. Lift the adapter board out of the enclosure.

12. Repeat steps 9 through 11 for each adapter board you are replacing.

13. Leave the enclosure open.

Installing an ATTO ExpressPCI-FC 3321 Adapter

Board

The ATTO ExpressPCI-FC 3321 adapter board ships separately from the

LANserver EX system. You must install the board in the LANserver EX

system.

Single-channel Dual-channel

adapter boards

Fibre Channel

adapter boards

Fibre Channel

0575101A_IN.fm Page 6 Thursday, March 13, 2003 4:13 PM

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Pas de commentaire

ATTO Technology FC-3321 Guide d'installation Page 6