Atto-technology Diamond Storage Array VT-Class Manuel d'utilisateur télécharger pdf (Page 67)

Update firmware

3 Copy the latest Diamond-VT image file

(“...”.ima) onto the host computer and note its

directory

c:\diamond\flash\“...”.ima

4 Change directories to the place where you

copied the “...”.ima file

cd c:\diamond\flash

5 Open an FTP session using a user-defined IP

address or the default (10.0.0.1) if it has not

changed. The IP address must be a valid

address for your network.

6 At the FTP login prompt, type sysadmin as the

userID.

7 Press Enter at the password prompt.

8Type put “...”.ima.

The Diamond should acknowledge receiving

the file and display a message not to interrupt

power for 90 seconds.

9 If upgrading the firmware from versions older

than 2.5.3, follow the procedures outlined in

Resetting Defaults

on page 63.

10 When the flash procedure is complete, cycle

power on the Diamond-VT.

CAUTIONCAUTION

Do not interrupt the flash process. If the

process is interrupted, the Diamond-VT

will become inoperable and will have to

be returned to the factory for repair.

Do not turn off the Diamond-VT until the

display returns the Ready prompt.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 95 96

Pas de commentaire

Atto-technology Diamond Storage Array VT-Class Manuel d'utilisateur Page 67